EHB 10 Electric Drilling/Breaking Hammer, 230V, hex19x82,5mm

Item Number: 0006943

Light and powerful!

Maximum work output is easy with the EHB as this high performance, lightweight electric rotary/demolition hammer is ideal for a wide range of applications. Designed for building remodeling, heating, sanitary, plumbing or scaffolding applications as well as demolition jobs. The optimum weight distribution allows the EHB to be easily operated in an overhead position.

  • Powered by a vibration-resistant, shockproof universal motor for either 230 V or 115 V, 50/60 Hz.
  • The vibration-damped handle and low recoil air-cushioned percussion system reduce operator fatigue.
  • Direct transmission of power to tool with no intermediate piston to reduce performance.
  • Drill drive can be completely switched off, eliminating wear and tear during breaking. Functions can be selected via quick throw-over switch. Breaking tools are automatically locked in position.
  • The large safety clutch and protective insulation provide additional safety.
  • Strong tool-holding fixture and guidance thanks to the hexagonal tool-holder 19 x 82,5 mm which ensures full contact along the entire length of the tool shank.
  • High operator comfort thanks to the electronic speed and percussion control (230 V only), dead man's switch and lock button.
  • External grease lubrication.
  • High operator comfort thanks to the electronic speed and percussion control (230 V50Hz only), dead man's switch and lock button.
  • High operator comfort thanks to the electronic speed and percussion control (230 V, 50 Hz only), dead man's switch and lock button.

Standard Package – EHB 10
includes 4 m power cable, additional handle, grease cartridge, injection-moulded carrycase with tool compartments, operator's manual and parts book

Description Metric Imperial
Length x width x height (without tool) 545 x 105 x 245 mm 21.5 x 4.1 x 9.6 in
Weight without tool 10 kg 22.1 lb
Shank hex 19 x 82,5 mm hex 0.75 x 3.25 in
Percussion rate 1.300 - 2.100 electronically adjustable 1/min 1,300 - 2,100 electronically adjustable blows/min
Drill speed 170 - 265 electronically adjustable 1/min 170 - 265 electronically adjustable rpm
Single stroke impact 15 (1,5) J (mkp) 11 ft lb/blow
Drive engine integrated universal a.c. motor 50/60 Hz with protective insulation
Voltage 230 1~ V 230 1~ V
Rated current 5 A 5 A
Power draw 1,15 kW 1.54 hp
Power transmission percussion system from engine via crank mechanism to air-cushioned percussion system
Power transmission drilling drive from engine via crank mechanism to bevel gear, safety clutch, drive shaft, tool holder bushing

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.

Accessories are not included with machine purchase.

Drill bit, 1 x 13in
0153664
Ratio system carbide rotary hammer drill bit, 1-inch diameter by 13-inches long.
Drill bit, 1 x 19in
0153665
Ratio system carbide rotary hammer drill bit, 1-inch diameter by 19-inches long.
Drill bit, 1-1/8 x 20in
0153666
Ratio system carbide rotary hammer drill bit, 1-1/8-inch diameter by 20-inch long.
Drill bit, 1-1/2 x 20in
0153669
Ratio system carbide rotary hammer drill bit, 1-1/2-inch diameter by 20-inches long.
Drill bit, 1-1/2in
0153670
Ratio system cruciform cutter head, 1-1/2-inch diameter.
Drill bit, 2-5/8in
0153673
Ratio system cruciform cutter head, 2-5/8-inch diameter.
Drill bit, 3-1/2in
0153675
Ratio system cruciform cutter head, 3-1/2-inch diameter.
Drill bit, 5in
0153678
Ratio system cruciform cutter head, 5-inch diameter.
Drill bit
0153690
Ratio system short pilot bit for cruciform cutter.
Drill bit
0153691
Ratio system long pilot bit for cruciform cutter.
Drill bit, 1/2 x 6in
0153692
Ratio system pilot bit for core bit cutter, 1/2-inch diameter by 6-inches long.
Drill bit
0153696
Ratio system threaded coupler for use with extension.
Bushing tool, 5 x 5
2006935
Twenty-five tooth bushing tool head for removing excess concrete or roughing up a surface as preparation for applying a substance - for use with drive shank.
Drill extension, 11in
0153680
Ratio system extension with threaded coupler for core bit and cruciform cutter head, 11-inches long.
Drill extension, 18in
0153681
Ratio system extension with threaded coupler for core bit and cruciform cutter head, 18-inches long.
Core bit drill, 1-1/2 x 3in
0153682
Ratio system core bit cutter head, 1-1/2-inch diameter by 3-inches long.
Core bit drill, 2 x 3in
0153683
Ratio system core bit cutter head, 2-inch diameter by 3-inches long.
Core bit drill, 3 x 3in
0153685
Ratio system core bit cutter head, 3-inch diameter by 3-inches long.
Core bit drill, 4 x 3in
0153687
Ratio system core bit cutter head, 4-inch diameter by 3-inches long.
Twist drill, 1,250 x 24inUC
0085166
A 3/4-inch hex drive rotary hammer drill bit, 1-1/4-inch diameter by 24-inches long under collar.
Twist drill, 1,375 x 12inUC
0085167
A 3/4-inch hex drive rotary hammer drill bit, 1-3/8-inch diameter by 12-inches long under collar.
Twist drill, 1,5 x 13-1/2inUC
0085168
A 3/4-inch hex drive rotary hammer drill bit, 1-1/2-inch diameter by 13-1/2-inches long under collar.
Twist drill, 2 x 13-1/2inUC
0085170
A 3/4-inch hex drive rotary hammer drill bit, 2-inch diameter by 13-1/2-inches long under collar.
Twist drill, 2 x 24inUC
0085171
A 3/4-inch hex drive rotary hammer drill bit, 2-inch diameter by 24-inches long under collar.
Chisel
0109321
Chisel star-shaped tip (3/4 hex) for EH 9/BL and EHB 11BL rotary demolition hammers and breakers.
Adapter, 3/4in
0153655
Ratio system 3/4-inch hex adapter - for ratio drill bits, core bits and cruciform bits.
Drill bit, 1/2ft x 9in
0153656
Ratio system carbide rotary hammer drill bit, 1/2-inch diameter by 9-inches long.
Drill bit, 5/8 x 13in
0153658
Ratio system carbide rotary hammer drill bit, 5/8-inch diameter by 13-inches long.

Model Guide

230/110 = Voltage, 9 = Weight (kg), B = Drill, BL = Brushless, E = Electric, H = Breaker, H = Hammer, M = SDS Max, S = US-Spline, magic = Designation

Model Drive engine Power draw Weight without tool
-
kW hp
kg lb
0008733
EHB 11 BL magic
three-phase induction motor with inverter in series for
1,2 1.6
11,0 24.3
0008745
EHB 11 BLM magic
three-phase induction motor with inverter in series for
1,2 1.6
11,7 25.8
0008742
EHB 11 BLS magic
three-phase induction motor with inverter in series for
1,2 1.6
11,5 25.4
0610309
EHB 7 M
double insulated universal motor
1.3 1.7
7.3 16.1

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.