EHB 10 Electric Drilling/Breaking Hammer, 115V, hex 19x82.5m

Item Number: 0007203

Light and powerful!

Maximum work output is easy with the EHB as this high performance, lightweight electric rotary/demolition hammer is ideal for a wide range of applications. Designed for building remodeling, heating, sanitary, plumbing or scaffolding applications as well as demolition jobs. The optimum weight distribution allows the EHB to be easily operated in an overhead position.

  • Powered by a vibration-resistant, shockproof universal motor for either 230 V or 115 V, 50/60 Hz.
  • The vibration-damped handle and low recoil air-cushioned percussion system reduce operator fatigue.
  • Direct transmission of power to tool with no intermediate piston to reduce performance.
  • Drill drive can be completely switched off, eliminating wear and tear during breaking. Functions can be selected via quick throw-over switch. Breaking tools are automatically locked in position.
  • The large safety clutch and protective insulation provide additional safety.
  • Strong tool-holding fixture and guidance thanks to the hexagonal tool-holder 19 x 82,5 mm which ensures full contact along the entire length of the tool shank.
  • High operator comfort thanks to the electronic speed and percussion control (230 V only), dead man's switch and lock button.
  • External grease lubrication.
  • High operator comfort thanks to the electronic speed and percussion control (230 V50Hz only), dead man's switch and lock button.
  • High operator comfort thanks to the electronic speed and percussion control (230 V, 50 Hz only), dead man's switch and lock button.

Standard Package – EHB 10
includes 4 m power cable, additional handle, grease cartridge, injection-moulded carrycase with tool compartments, operator's manual and parts book

Description Metric Imperial
Length x width x height (without tool) 545 x 105 x 245 mm 21.5 x 4.1 x 9.6 in
Weight without tool 10 kg 22.1 lb
Shank hex 19 x 82,5 mm hex 0.75 x 3.25 in
Percussion rate 1.300 - 2.100 electronically adjustable 1/min 1,300 - 2,100 electronically adjustable blows/min
Drill speed 170 - 265 electronically adjustable 1/min 170 - 265 electronically adjustable rpm
Single stroke impact 15 (1,5) J (mkp) 11 ft lb/blow
Drive engine integrated universal a.c. motor 50/60 Hz with protective insulation
Voltage 110 1~ V 110 1~ V
Rated current 10 A 10 A
Power draw 1,1 kW 1.48 hp
Power transmission percussion system from engine via crank mechanism to air-cushioned percussion system
Power transmission drilling drive from engine via crank mechanism to bevel gear, safety clutch, drive shaft, tool holder bushing

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.

Details regarding accessories not available. Please call for information if you need assistance.

Model Guide

230/110 = Voltage, 9 = Weight (kg), B = Drill, BL = Brushless, E = Electric, H = Breaker, H = Hammer, M = SDS Max, S = US-Spline, magic = Designation

Model Drive engine Power draw Weight without tool
-
kW hp
kg lb
0008733
EHB 11 BL magic
three-phase induction motor with inverter in series for
1,2 1.6
11,0 24.3
0008745
EHB 11 BLM magic
three-phase induction motor with inverter in series for
1,2 1.6
11,7 25.8
0008742
EHB 11 BLS magic
three-phase induction motor with inverter in series for
1,2 1.6
11,5 25.4
0610309
EHB 7 M
double insulated universal motor
1.3 1.7
7.3 16.1

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.