PG 3A 3in Centrifugal Dewatering Pump

Item Number: 0007659

  • PG 3A
  • PG 3A
  • PG 3A

Centrifugal dewatering pumps are the value alternative for keeping jobsites dry

  • Cast iron impeller and volute are wear resistant for long life and minimal service.
  • Pump out vanes on back of impeller reduce debris accumulation and downtime while allowing greater productivity.
  • Carbon ceramic mechanical seal teamed with reliable four-cycle engine with low oil shutdown provides for increased operating life.
  • High strength lightweight diecast aluminum housing increases the years of trouble-free pump life. A heavy-duty protective frame provides convenient carry handles while adding extra protection for the pump.
  • Self-priming high performance pump capable of handling solids up to .25 inch (6,5mm), ideal for jobsites with relatively clean waters.

Standard Package – PG 3A
Include strainer, T-bolt clamp, operator's manual and parts book.

Description Metric Imperial
Suction & discharge diameter 76.2 mm 3 in
Length x width x height 514 x 404 x 462 mm 20.2 x 15.9 x 18.2 in
Operating weight 31 kg 69 lb
Shipping weight (including packaging) 34 kg 75 lb
Shipping size 539 x 429 x 492 mm 21.2 x 16.9 x 19.4 in
Max. head 30 m 98 ft
Max. discharge 1000 l/min 264 US gpm
Max. suction lift 7.6 m 25 ft
Solid size capacity 6,5 mm .25 in
Engine Type air-cooled, 4-cycle, single cylinder, gasoline engine Honda
Displacement 163 cm3 9.9 in3
Max. Rated Power at Rated Speed* 3.6 kW at 3600 rpm 4.8 hp at 3600 rpm
Power Rating Specification SAE J1349 SAE J1349
Fuel tank capacity 3.6 l 3.8 US qt
Fuel consumption 1.8 l/h 1.9 US qt/h

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.

Accessories are not included with machine purchase.

Quick disconnect coupling, 76mm/3in
0070340
A 3-inch diameter male quick disconnect for the hose side of the pump with attached hose barb. The coupling needs to be attached to the hose with a T-bolt clamp (Item number 0028699).

Model Guide

2/3 = Discharge diameter in inches, PG = Centrifugal dewatering pump

Model Engine type Max. power output Max. head Max. discharge Solid size capacity Operating weight
-
- -
m ft
l/min US gpm
mm in
kg lb
0009496
PG 2
air-cooled, 4-cycle, single cylinder, gasoline engine W
3.2 kW at 4000 rpm 4.3 hp at 4000 rpm
30 98
600 158
6.5 .25
24 53
0007658
PG 2A
air-cooled, 4-cycle, single cylinder, gasoline engine Honda
2.6 kW at 3600 rpm 3.5 hp at 3600 rpm
30 98
600 159
6.5 .25
24 53
0009498
PG 3
air-cooled, 4-cycle, single cylinder, gasoline engine W
4.2 kW at 4000 rpm 5.7 hp at 4000 rpm
31 101
970 256
6.5 .25
31 69
0007659
PG 3A
air-cooled, 4-cycle, single cylinder, gasoline engine Honda
3.6 kW at 3600 rpm 4.8 hp at 3600 rpm
30 98
1000 264
6,5 .25
31 69

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.