EHB 11 BLS magic Electric Drilling/Chisseling Hammer, 115V, large spli

Item Number: 0008742

  • EHB 11 BLS magic
  • EHB 11 BLS magic
  • EHB 11 BLS magic

Maintenance-free time is money!

The innovative magic drilling and chiseling hammers save money because they lose no time due to maintenance and failures: The three-phase AC motor means that there is no changing of worn-out carbon brushes. Failures due to burnt-out windings in the rotor of the motor are likewise a thing of the past. On the other hand, the built-in frequency inverter is a very useful feature, since it means that magic electric hammers can be plugged in to a standard mains socket.

  • No wear at all: non-contact rpm setting.
  • Consistent and concentrated performance in hard and soft materials through the new high-tech percussion system.
  • Undoubtedly safer operation for the user through the unique built-in converter: automatic voltage matching protects against under- and over-voltages.
  • The work becomes less tiring thanks to the individually adjustable Pro-Ergo® handle system: Quick and easy shifting of the holding position during the work means more can be done in the same time.
  • Optionally can be equipped with SDS-max (BLM) or hexagonal tool shank (BL).

Standard Package – EHB 11 BLS magic
incl. 5 m supply cable, injection-moulded carrycase with tool compartments, grease gun with 180 cm3 grease, instruction book and EC-Conformity Certificate

Description Metric Imperial
L x w x h (without tool) 620 x 105 x 245 mm 24.4 x 4.1 x 9.6 in
Weight without tool 11,5 kg 25.4 lb
Shaft for drilling tool large spline drive large spline drive
Shaft for breaking tool hex 19 x 82,5 mm hex 0.75 x 3.25 in
Percussion rate (adjustable) 1.300 - 2.150 1/min 1,300 - 2,150 blows/min
Drill speed 140-225 1/min 140-225 rpm
Single stroke impact 19 (1,9) J (mkp) 14 ft lb/blow
Demolition performance 600 kg/h 1,320 lb/h
Drive engine three-phase induction motor with inverter in series for alternating current 50/60 Hz with protective insulation
Voltage 110 - 127 1~ V 110 - 127 1~ V
Rated current 13 A 13 A
Power draw (required generator output: 3,3 kW) 1,2 kW 1.6 hp
Percussion system air-cushioned percussion system
Drilling drive with safety clutch and disconnectable drive shaft
Sound power level conforming to EC guideline 84/537/EEC 93 dB(A) 93 dB(A)

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.

Accessories are not included with machine purchase.

Drill bit
0153690
Ratio system short pilot bit for cruciform cutter.
Drill bit
0153691
Ratio system long pilot bit for cruciform cutter.
Drill bit, 1/2 x 6in
0153692
Ratio system pilot bit for core bit cutter, 1/2-inch diameter by 6-inches long.
Drill bit
0153696
Ratio system threaded coupler for use with extension.
Chisel, 12in
0154059
Spline drive bull/moil point chisel for more precise demolition applications, measures 12-inches long.
Chisel, 18in
0154060
Spline drive bull/moil point chisel for more precise demolition applications, measures 18-inches long.
Chisel, 1 x 12in
0154061
Spline drive flat point chisel for general chipping applications, 1-inch wide by 12-inches long.
Chisel, 1 x 18in
0154062
Spline drive flat point chisel for general chipping applications, 1-inch wide by 18-inches long.
Chisel, 4 x 17in
0154064
Spline drive clay spade for digging in cohesive soils and hard packed gravel, 4-inches wide by 17-inches long.
Chisel, 1-1/4 x 12in
0154065
Spline drive scaling chisel for general demolition applications, 1-1/4-inch wide by 12-inches long.
Chisel, 2 x 12in
0154066
Spline drive scaling chisel for general demolition applications, 2-inches wide by 12-inches long.
Chisel, 3 x 12in
0154067
Spline drive scaling chisel for general demolition applications, 3-inches wide by 12-inches long.
Chisel, 3/4 x 10in
0154069
Spline drive ground rod driver for driving ground rods, 3/4-inch inside diameter by 10-inches long.
Chisel, 1-3/4 x 10
0154070
Spline drive one-piece bushing tool for removing excess concrete or roughing up a surface as preparation for applying a substance.
Chisel, 12
0154071
Spline drive shank for use with 25-tooth bushing head, measures 12-inches long.
Drill bit, 5/8 x 11in
0154125
Spline drive rotary hammer drill bit, Quadro-X head measuring 5/8-inch diameter by 11-inches long.
Drill bit, 5/8 x 16in
0154126
Spline drive rotary hammer drill bit, Quadro-X head measuring 5/8-inch diameter by 16-inches long.
Drill bit, 5/8 x 23in
0154127
Spline drive rotary hammer drill bit, Quadro-X head measuring 5/8-inch diameter by 23-inches long.
Drill bit, 5/8 x 27in
0154128
Spline drive rotary hammer drill bit, Quadro-X head measuring 5/8-inch diameter by 27-inches long.
Drill bit, 3/4 x 11in
0154131
Spline drive rotary hammer drill bit, Quadro-X head measuring 3/4-inch diameter by 11-inches long.
Drill bit, 3/4 x 23in
0154133
Spline drive rotary hammer drill bit, Quadro-X head measuring 3/4-inch diameter by 23-inches long.
Drill bit, 3/4 x 36in
0154135
Spline drive rotary hammer drill bit, Quadro-X head measuring 3/4-inch diameter by 36-inches long.
Drill bit, 1 x 16in
0154139
Spline drive rotary hammer drill bit, Quadro-X head measuring 1-inch diameter by 16-inches long.
Drill bit, 1 x 23in
0154140
Spline drive rotary hammer drill bit, Quadro-X head measuring 1-inch diameter by 23-inches long.
Drill bit, 1 x 36in
0154141
Spline drive rotary hammer drill bit, Quadro-X head measuring 1-inch diameter by 36-inches long.
Drill bit, 1-1/8 x 16in
0154142
Spline drive rotary hammer drill bit, Quadro-X head measuring 1-1/8-inch diameter by 16-inches long.
Drill bit, 1-1/8 x 23in
0154143
Spline drive rotary hammer drill bit, Quadro-X head measuring 1-1/8-inch diameter by 23-inches long.
Drill bit, 1-1/4 x 23in
0154145
Spline drive rotary hammer drill bit, Quadro-X head measuring 1-1/4-inch diameter by 23-inches long.
Drill bit, 1-3/8 x 23in
0154148
Spline drive rotary hammer drill bit, Quadro-X head measuring 1-3/8-inch diameter by 23-inches long.
Drill bit, 1-1/2 x 23in
0154149
Spline drive rotary hammer drill bit, Quadro-X head measuring 1-1/2-inch diameter by 23-inches long.
Drill bit, 1-3/4 x 23in
0154150
Spline drive rotary hammer drill bit, Quadro-X head measuring 1-3/4-inch diameter by 23-inches long.
Drill bit, 2 x 23in
0154151
Spline drive rotary hammer drill bit, Quadro-X head measuring 2-inch diameter by 23-inches long.
Drill bit, 3/8 x 8in
0154152
Spline drive rotary hammer drill bit, standard cutter head measuring 3/8-inch diameter by 8-inches long.
Drill bit, 3/8 x 11in
0154153
Spline drive rotary hammer drill bit, standard cutter head measuring 3/8-inch diameter by 11-inches long.
Drill bit, 3/8 x 16in
0154155
Spline drive rotary hammer drill bit, standard cutter head measuring 3/8-inch diameter by 16-inches long.
Drill bit, 1/2 x 11in
0154157
Spline drive rotary hammer drill bit, standard cutter head measuring 1/2-inch diameter by 11-inches long.
Drill bit, 1/2 x 16in
0154158
Spline drive rotary hammer drill bit, standard cutter head measuring 1/2-inch diameter by 16-inch long.
Drill bit, 1/2 x 13in
0154162
Spline drive rotary hammer drill bit, standard cutter head measuring 1/2 inchdiameter x 13 inchlong
Drill bit, 9/16 x 11in
0154163
Spline drive rotary hammer drill bit, standard cutter head measuring 9/16-inch diameter by 11-inches long.
Drill bit, 9/16 x 16in
0154164
Spline drive rotary hammer drill bit, standard cutter head measuring 9/16-inch diameter by 16-inches long.
Drill bit, 5/8 x 11in
0154167
Spline drive rotary hammer drill bit, standard cutter head measuring 5/8-inch diameter by 11-inches long.
Drill bit, 5/8 x 16in
0154168
Spline drive rotary hammer drill bit, standard cutter head measuring 5/8-inch diameter by 16-inches long.
Drill bit, 5/8 x 27in
0154169
Spline drive rotary hammer drill bit, standard cutter head measuring 5/8-inch diameter by 27-inches long.
Drill bit, 5/8 x 13in
0154171
Spline drive rotary hammer drill bit, standard cutter head measuring 5/8-inch diameter by 13-inches long.
Drill bit, 5/8 x 23in
0154172
Spline drive rotary hammer drill bit, standard cutter head measuring 5/8-inch diameter by 23-inches long.
Drill bit, 3/4 x 11in
0154175
Spline drive rotary hammer drill bit, standard cutter head measuring 3/4-inch diameter by 11-inches long.
Drill bit, 3/4 x 16in
0154176
Spline drive rotary hammer drill bit, standard cutter head measuring 3/4-inch diameter by 16-inches long.
Drill bit, 3/4 x 23in
0154177
Spline drive rotary hammer drill bit, standard cutter head measuring 3/4-inch diameter by 23-inches long.
Drill bit, 3/4 x 27in
0154178
Spline drive rotary hammer drill bit, standard cutter head measuring 3/4-inch diameter by 27-inches long.
Drill bit, 3/4 x 36in
0154179
Spline drive rotary hammer drill bit, standard cutter head measuring 3/4-inches diameter by 36-inches long.
Drill bit, 3/4 x 13in
0154180
Spline drive rotary hammer drill bit, standard cutter head measuring 3/4-inch diameter by 13-inches long.
Drill bit, 7/8 x 16in
0154183
Spline drive rotary hammer drill bit, standard cutter head measuring 7/8-inch diameter by 16-inches long.
Drill bit, 1 x 16in
0154186
Spline drive rotary hammer drill bit, standard cutter head measuring 1-inch diameter by 16-inches long.
Drill bit, 1 x 23in
0154187
Spline drive rotary hammer drill bit, standard cutter head measuring 1-inch diameter by 23-inches long.
Drill bit, 1-1/8 x 23in
0154191
Spline drive rotary hammer drill bit, standard cutter head measuring 1-1/8-inche diameter by 23-inches long.
Core bit drill, 2 x 12in
0154218
Spline drive single piece core bit with pilot bit measuring 2-inch diameter by 12-inches long.
Core bit drill, 2 x 22in
0154219
Spline drive single piece core bit with pilot bit measuring 2-inch diameter by 22-inches long.
Core bit drill, 3 x 12in
0154222
Spline drive single piece core bit with pilot bit measuring 3-inch diameter by 12-inches long.
Core bit drill, 3-1/2 x 12in
0154224
Spline drive single piece core bit with pilot bit measuring 3-1/2-inch diameter by 12-inches long.
Core bit drill, 3-1/2 x 22in
0154225
Spline drive single piece core bit with pilot bit measuring 3-1/2-inch diameter by 22-inches long.
Core bit drill, 1 x 12in
0154226
Spline drive single piece core bit with pilot bit measuring 4-inch diameter by 12-inches long.
Core bit drill
0154227
Spline drive single piece core bit with pilot bit measuring 4-inch diameter by 22-inches long.
Core bit drill, 5 x 22in
0154229
Spline drive single piece core bit with pilot bit measuring 5-inch diameter by 22-inches long.
Core bit drill, 2 x 5in
0154231
Core drill body for two-piece core system, 2-inch diameter by 5-inches long - for use with SDS-Max or Spline adapter.
Core bit drill, 2-5/8 x 5in
0154232
Core drill body for two-piece core system, 2-5/8-inch diameter by 5-inches long - for use with SDS-Max or Spline adapter.
Core bit drill, 4 x 5in
0154235
Core drill body for two-piece core system, 4-inch diameter by 5-inches long - for use with SDS-Max or Spline adapter.

Model Guide

230/110 = Voltage, 9 = Weight (kg), B = Drill, BL = Brushless, E = Electric, H = Breaker, H = Hammer, M = SDS Max, S = US-Spline, magic = Designation

Model Drive engine Power draw Weight without tool
-
kW hp
kg lb
0008733
EHB 11 BL magic
three-phase induction motor with inverter in series for
1,2 1.6
11,0 24.3
0008745
EHB 11 BLM magic
three-phase induction motor with inverter in series for
1,2 1.6
11,7 25.8
0008742
EHB 11 BLS magic
three-phase induction motor with inverter in series for
1,2 1.6
11,5 25.4
0610309
EHB 7 M
double insulated universal motor
1.3 1.7
7.3 16.1

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.