EHB 11 BLM magic Electric Drilling/Chisseling Hammer, 115V, SDS-max

Item Number: 0008745

  • EHB 11 BLM magic
  • EHB 11 BLM magic
  • EHB 11 BLM magic

Maintenance-free time is money!

The innovative magic drilling and chiseling hammers save money because they lose no time due to maintenance and failures: The three-phase AC motor means that there is no changing of worn-out carbon brushes. Failures due to burnt-out windings in the rotor of the motor are likewise a thing of the past. On the other hand, the built-in frequency inverter is a very useful feature, since it means that magic electric hammers can be plugged in to a standard mains socket.

  • No wear at all: non-contact rpm setting.
  • Consistent and concentrated performance in hard and soft materials due to the new high-tech percussion system.
  • Undoubtedly safer operation for the user due to the unique built-in converter: automatic voltage-matching protects against under- and over-voltages.
  • The work becomes less tiring thanks to the individually adjustable Pro-Ergo® handle system: Quick and easy shifting of the holding position during the work means more can be done in the same time. Naturally, we also offer a standard handle by request.
  • Optionally can be equipped with SDS-max (BLM) or hexagonal tool shank (BL).

Standard Package – EHB 11 BLM magic
incl. 5 m supply cable, injection-moulded carrycase with tool compartments, grease gun with 180 cm3 grease, instruction book and EC-Conformity Certificate

Description Metric Imperial
L x w x h (without tool) 620 x 105 x 245 mm 24.4 x 4.1 x 9.6 in
Weight without tool 11,7 kg 25.8 lb
Shank SDS-max mm SDS-max in
Percussion rate (adjustable) 1.300 - 2.150 1/min 1,300 - 2,150 blows/min
Drill speed 140-225 1/min 140-225 rpm
Single stroke impact 19 (1,9) J (mkp) 14 ft lb/blow
Demolition performance 600 kg/h 1,320 lb/h
Drive engine three-phase induction motor with inverter in series for alternating current 50/60 Hz with protective insulation
Voltage 110 - 127 1~ V 110 - 127 1~ V
Rated current 13 A 13 A
Power draw (required generator output: 3,3 kW) 1,2 kW 1.6 hp
Percussion system air-cushioned percussion system
Drilling drive with safety clutch and disconnectable drive shaft
Sound power level conforming to EC guideline 84/537/EEC 93 dB(A) 93 dB(A)

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.

Accessories are not included with machine purchase.

Chisel, 1-3/4 x 10
0154085
SDS-Max drive one-piece busing tool for removing excess concrete or roughing up a surface as preparation for applying a substance.
Chisel, 4-3/8 x 16in
0154088
SDS-Max drive asphalt cutter for cutting asphalt and hard ground, 4-3/8-inches wide by 16-inches long.
Chisel, 4-1/2 x 17in
0154089
SDS-Max drive clay spade for digging in cohesive soils and hard-packed gravel, 4-1/2-inches wide by 17-inches long.
Drill bit, 1/2 x 13in
0154090
SDS-Max drive rotary hammer drill bit, 2 cutter head measuring 1/2-inch diameter by 13-inches long.
Drill bit, 1/2 x 21in
0154091
SDS-Max drive rotary hammer drill bit, 2 cutter head measuring 1/2-inch diameter by 21-inches long.
Drill bit, 9/16 x 13in
0154092
SDS-Max drive rotary hammer drill bit, 2 cutter head measuring 9/16-inch diameter by 13-inches long.
Drill bit, 1-3/4 x 23in
0154094
SDS-Max drive rotary hammer drill bit, 2 cutter head measuring 1-3/4-inch diameter by 23-inches long.
Drill bit, 5/8 x 13in
0154096
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 5/8-inch diameter by 13-inches long.
Drill bit, 3/4 x 13in
0154100
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 11/16-inch diameter by 21-inch long.
Drill bit, 3/4 x 21in
0154101
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 3/4-inch diameter by 21-inches long.
Drill bit, 3/4 x 36in
0154102
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 3/4-inch diameter by 36-inches long.
Chisel, 1 x 12
0154073
SDS-Max drive flat point chisel for general chipping applications, 1-inch wide by 12-inches long.
Chisel, 1 x 18
0154074
SDS-Max drive flat point chisel for general chipping applications, 1-inch wide by 18-inches long.
Chisel, 12
0154075
SDS-Max drive flat point chisel for general chipping applications, 1-inch wide by 12-inches long.
Chisel, 18
0154076
SDS-Max drive flat point chisel for general chipping applications, 1-inch wide by 18-inches long.
Chisel, 1-1/4 x 12in
0154077
SDS-Max drive scaling chisel for general demolition applications, 1-1/4-inch wide by 12-inches long.
Chisel, 2 x 12in
0154078
SDS-Max drive scaling chisel for general demolition applications, 2-inches wide by 12-inches long.
Chisel, 3-1/8 x 12in
0154079
SDS-Max drive scaling chisel for general demolition applications, 3-1/8-inches wide by 12-inches long.
Chisel, 1-1/8 x 12in
0154080
SDS-Max drive mortar chisel for mortar removal between bricks, 1-1/8-inch wide by 12-inches long.
Chisel, 1-1/4 x 12in
0154081
SDS-Max drive slotting chisel for breaking out material between drilled holes, 1-1/4-inch wide by 12-inches long.
Chisel, 2 x 12in
0154082
SDS-Max drive floor scraper for tile removal and clean-up work, 2-inches wide by 12-inches long.
Drill bit, 1-1/8 x 23in
0154113
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 1-1/8-inch diameter by 23-inches long.
Drill bit, 1-1/4 x 15in
0154115
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 1-1/4-inch diameter by 15-inch long.
Drill bit, 1-1/4 x 23in
0154116
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 1-1/4-inch diameter by 23-inches long.
Drill bit, 1-3/8 x 23in
0154119
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 1-3/8-inch diameter by 23-inches long.
Drill bit, 1-1/2 x 17in
0154121
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 1-1/2-inch diameter by 17-inches long.
Drill bit, 1-1/2 x 23in
0154122
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 1-1/2-inch diameter by 23-inches long.
Core bit drill, 3 x 3in
0153685
Ratio system core bit cutter head, 3-inch diameter by 3-inches long.
Core bit drill, 4 x 3in
0153687
Ratio system core bit cutter head, 4-inch diameter by 3-inches long.
Drill bit
0153690
Ratio system short pilot bit for cruciform cutter.
Drill bit
0153691
Ratio system long pilot bit for cruciform cutter.
Drill bit, 1/2 x 6in
0153692
Ratio system pilot bit for core bit cutter, 1/2-inch diameter by 6-inches long.
Drill bit
0153696
Ratio system threaded coupler for use with extension.
Drill bit, 1-3/4 x 23in
0154124
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 1-3/4-inch diameter by 23-inches long.
Core bit drill, 1-1/2 x 12in
0154201
SDS-Max drive single piece core bit with pilot bit measuring 1-1/2-inch diameter by 12-inches long.
Core bit drill, 1-1/2 x 22in
0154202
SDS-Max drive single piece core bit with pilot bit measuring 1-1/2-inch diameter by 22-inches long.
Core bit drill, 2 x 12in
0154203
SDS-Max drive single piece core bit with pilot bit measuring 2-inch diameter by 12-inches long.
Core bit drill, 2 x 22in
0154204
SDS-Max drive single piece core bit with pilot bit measuring 2-inch diameter by 22-inches long.
Core bit drill, 2-1/2 x 12in
0154205
SDS-Max drive single piece core bit with pilot bit measuring 2-1/2-inch diameter by 12-inches long.
Core bit drill, 2-1/2 x 22in
0154206
SDS-Max drive single piece core bit with pilot bit measuring 2-1/2-inch diameter by 22-inches long.
Core bit drill, 3 x 12in
0154207
SDS-Max drive single piece core bit with pilot bit measuring 3-inch diameter by 12-inches long.
Core bit drill, 3 x 22in
0154208
SDS-Max drive single piece core bit with pilot bit measuring 3-inch diameter by 22-inches long.
Core bit drill, 4 x 5in
0154235
Core drill body for two-piece core system, 4-inch diameter by 5-inches long - for use with SDS-Max or Spline adapter.
Core bit drill
0154236
Core drill body for two-piece core system, 5-inch diameter by 5-iches long - for use with SDS-Max or Spline adapter.
Adapter, 18in
0154238
SDS-Max drive adapter for two-piece core system, 18-inches long - for use with core drill body.
Adapter, 8in
0154239
SDS-Max drive adapter for two-piece core system, 8-inches long - for use with core drill body.
Ejector key
0154243
Core drill center bit retaining pin ejector key for removing center bit.
Drill bit, 5/16 x 5in
0154244
Core Drill Center Bit, 5/16" diameter x 5" long - for use as a replacement bit on Core Drill Bits
Drill bit, 1 x 13in
0154108
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 1-inch diameter by 13-inches long.
Drill bit, 1 x 21in
0154109
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 1-inch diameter by 21-inches long.
Drill bit, 1 x 36in
0154110
SDS-Max drive rotary hammer drill bit, Quadro-X head measuring 1-inch diameter by 36-inches long.
Core bit drill, 3-1/2 x 22in
0154210
SDS-Max drive single piece core bit with pilot bit measuring 3-1/2-inch diameter by 22-inches long.
Core bit drill, 4 x 12in
0154211
SDS-Max drive single piece core bit with pilot bit measuring 4-inch diameter by 12-inches long.
Core bit drill, 5 x 22in
0154214
SDS-Max drive single piece core bit with pilot bit measuring 5-inch diameter by 22-inches long.
Core bit drill, 6 x 22in
0154215
SDS-Max drive single piece core bit with pilot bit measuring 6-inch diameter by 22-inches long.
Core bit drill, 2 x 5in
0154231
Core drill body for two-piece core system, 2-inch diameter by 5-inches long - for use with SDS-Max or Spline adapter.
Core bit drill, 2-5/8 x 5in
0154232
Core drill body for two-piece core system, 2-5/8-inch diameter by 5-inches long - for use with SDS-Max or Spline adapter.
Drill
0125547
We are working on providing a more detailed description for this item, and it will be available shortly. Thank you for your patience while we are improving our web site.
Adapter
0153653
Ratio system spline adapter - for ratio drill bits, core bits and cruciform bits.
Adapter, 3/4in
0153655
Ratio system 3/4-inch hex adapter - for ratio drill bits, core bits and cruciform bits.
Adapter, 18in
0154240
Spline drive adapter for two-piece core system, 18-inches long - use with core drill body.
Adapter, 8in
0154241
Spline drive adapter for two-piece core system, 8-inches long - for use with core drill body.

Model Guide

230/110 = Voltage, 9 = Weight (kg), B = Drill, BL = Brushless, E = Electric, H = Breaker, H = Hammer, M = SDS Max, S = US-Spline, magic = Designation

Model Drive engine Power draw Weight without tool
-
kW hp
kg lb
0008733
EHB 11 BL magic
three-phase induction motor with inverter in series for
1,2 1.6
11,0 24.3
0008745
EHB 11 BLM magic
three-phase induction motor with inverter in series for
1,2 1.6
11,7 25.8
0008742
EHB 11 BLS magic
three-phase induction motor with inverter in series for
1,2 1.6
11,5 25.4
0610309
EHB 7 M
double insulated universal motor
1.3 1.7
7.3 16.1

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.