PST2 400 50mm/2in Submersible Pump 110V/60Hz

Item Number: 0009112

  • PST2 400
  • PST2 400
  • PST2 400
  • PST2 400

Application

  • These high performance single-phase submersible pumps are capable of handling solids up to .4 inches, ideal for job sites needing fast dependable dewatering.
  • Lightweight, compact design with heavy-duty, strain relief power cord offers a highly durable pump that is still easy to transport and install.
  • Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs
  • Silicon carbide-faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrications, cooling and overall motor protection.
  • Oil lifter provides lubrication to seal faces during operation mimimizing the risk of seal failure due to overheating.
  • PST models feature shaft-mounted agitators which suspend solids when pumping sand and debris. These PST units are also built with ductile iron housing for excellent wear life when pumping water with some entrapped solids.

Standard Package – PST2 400
Above package includes electrical supply cable, operator's manual and parts book.

Description Metric Imperial
Discharge diameter 50 mm 2 in
Length x width x height 250 x 185 x 330 mm 9.8 x 7.3 x 13 in
Operating weight 11,3 kg 25 lb
Shipping weight (including packaging) 13,2 kg 29 lb
Shipping size (LxWxH) 415 x 260 x 225 mm 16.3 x 10.3 x 8.8 in
Max. head 12 m 39 ft
Max. discharge 200 l/min 53 US gpm
Max. pressure 1,15 bar 16.8 psi
Solid size capacity 9,5 mm 0.4 in
Motor type Single phase/60 Hz
Voltage 110 V 110 V
Current (full load/start @ 110V) 5,4/12,5 A 5.4/12.5 A
Speed 3.350 1/min 3,350 rpm
Max. power output according to DIN-ISO 3046* 0,40 kW 1/2 hp
Cable length 6 m 20 ft
Cable size 1,31 mm2 16 AWG
Impeller material Urethane rubber
Impeller type Semi-vortex

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.

Accessories are not included with machine purchase.

Float, PS 2 750
0119603
An automatic float switch for single phase, 110 volt, 1 horsepower submersible pumps. This switch fits the PS2 750 submersible pump model.

Model Guide

1 or 2 = Discharge diameter in inches, 1503/2203/3703/5503/7503/11003 = Motor Power in watts, 2/3/4 = Discharge Diameter in inches, 400/750 = Motor Power in watts, 500 = Power in Watts, A = Automatic, G = Ground, HF = High Flow, HH = High Head, P = Pump, PS = Submersible pump, R = Residue, S = Submersible

Model Max. power output Max. head Max. discharge Discharge diameter Voltage Length x width x height Operating weight
kW hp
m ft
l/min US gpm
mm in
V V
mm in
kg lb
0009113
PS2 500
0,48 2/3
12 39.5
236 62.4
50 2
110 110
185 x 185 x 305 7.3 x 7.3 x 12
9,5 21
0620442
PS2 800
0.75 1
18 59
310 82
50 2
110 / 115 / 120 -
192 x 187 x 341 7.6 x 7.4 x 13.4
13.2 29
0009114
PSA2 500
0,48 2/3
12 39.5
236 62.4
50 2
110 110
220 x 185 x 305 8.7 x 7.3 x 12
10,0 22
0620412
PSG2 500
0.48 0.64
12 40
236 62.4
50 2
110 110
210 x 210 x 285 8.3 x 8.3 x 11.2
10.5 23
0009112
PST2 400
0,40 1/2
12 39
200 53
50 2
110 110
250 x 185 x 330 9.8 x 7.3 x 13
11,3 25
0620435
PSTF2 400
0,4 .54
12,0 39
200 53
50 2
110/115/120 -
255 x 185 x 328 10 x 7.3 x 13
11,3 25

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.