PS2 1503 2in Submersible Pump 220V/60Hz

Item Number: 0009120

  • PS2 1503
  • PS2 1503
  • PS2 1503

Application

  • Compact slim line design in a rugged cast iron case.
  • Top discharge, flow-through design enables operation at low water levels for extended periods.
  • Durable high chrome impeller with ductile iron wear plate reduces wear when pumping abrasive materials.
  • Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.
  • Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor.
  • Silicon carbide double mechanical seals run in an oil-filled cavity allowing for seal lubrication, cooling and overall motor protection.
  • Additional lip seal protects mechanical seal from abrasive wear due to suspended debris in pumping fluid.
  • High efficiency, continuous duty motor with built-in thermal and over current motor protection increases motor life.

Standard Package – PS2 1503
Above package includes electrical supply cable, operator's manual and parts book. Some standard packages include Storz coupling.

Description Metric Imperial
Discharge diameter 50 mm 2 in
Length x width x height 235 x 215 x 480 mm 9.3 x 8.5 x 18.8 in
Operating weight 29 kg 64 lb
Shipping weight (including packaging) 34 kg 75 lb
Shipping size (LxWxH) 280 x 265 x 585 mm 11 x 10.5 x 23 in
Max. head 23 m 75 ft
Max. discharge 400 l/min 106 US gpm
Max. pressure 2,28 bar 33 psi
Solid size capacity 8,5 mm .3 in
Motor type Three Phase / 60 Hz
Voltage 220 V 220 V
Current (full load/start @ 220V) 6,1/42,0 A 6.1/42 A
Speed 3.400 1/min 3,400 rpm
Max. power output according to DIN-ISO 3046* 1,5 kW 2 hp
Cable length 15 m 50 ft
Cable size 1,31 mm2 16 AWG

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.

Accessories are not included with machine purchase.

Clamp
2005952
Threaded hose clamp for securing male and female threaded connectors as well as quick disconnectors onto 3-inch diameter suction and discharge hoses.

Model Guide

1503/2203/3703/5503/7503/11003 = Motor Power in watts, 2/3/4 = Discharge Diameter in inches, HF = High Flow, HH = High Head, P = Pump, S = Submersible

Model Max. power output Max. head Max. discharge Discharge diameter Voltage Length x width x height Operating weight
kW hp
m ft
l/min US gpm
mm in
V V
mm in
kg lb
0009126
PS 2 2203
2,2 3
30,5 100
500 132
50 2
220 220
235 x 215 x 480 9.3 x 8.5 x 18.8
32 71
0009132
PS 2 3703
3,7 5
35 115
540 143
50 2
220 220
285 x 250 x 625 11.1 x 10 x 24.5
55 121
0009123
PS 3 1503
1,5 2
14,4 47
680 180
80 3
220 220
235 x 215 x 480 9.3 x 8.5 x 18.8
29 64
0009120
PS2 1503
1,5 2
23 75
400 106
50 2
220 220
235 x 215 x 480 9.3 x 8.5 x 18.8
29 64

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.