HE 100 Truss Screed - End Section, 10 ft

Item Number: 0130384

Easy to assemble and adjust screeds offer high performance and jobsite productivity

Vibratory truss screeds are designed for precise strike-off and consolidation of concrete surfaces up to 25 cm/10 inches thick where critical flatness is desired. The bolted construction throughout the screed sections allow for fast assembly without special tools. The T-bolt adjuster provides quick, precise adjustments for flat, crowned or inverted strike-off.

  • Bolted construction throughout screed sections allows fast assembly without special tools.
  • Wide span up to 75 feet (heavy-duty) for large floor pours.
  • T-bolt adjuster provides quick, precise adjustments for flat, crowned, or inverted strike-off.
  • Winch system consists of two cranks located on same end of screed for one person operation.
  • Connector plate with greaseable flange bearing provides rigidity for even vibration and fast assembly of sections.
  • Eccentric weights located near shaft bearings prevent shaft whip and extend bearing life.
  • Lightweight, high strength aluminum truss for reduced weight and easy machine handling.
  • Fully self-contained unit will run on any form, such as pipe, wood, block or metal.
  • Accessories available to meet recessed pour or wall slider requirements. Outrigger attachment adds one foot without disassembly.

Standard Package – HE 100
Above package includes operator's manual and parts book.

Description Metric Imperial
Length 3.1 m 10.2 ft
Beam width 355 mm 14 in
Height 475 mm 19 in
Weight 55 kg 121 lb

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.

Details regarding accessories not available. Please call for information if you need assistance.

 
The manuals for this machine revision are currently not available on-line.
 
 
 
 



Model Guide

100 = 10.0 feet, 50 = 5.0 feet, C = Center section, E = End section, G = High performance engine, H = Heavy-duty model, P = Power section

Model Engine type Horsepower Length x width x height Beam width Height Weight
-
kW hp
mm in
mm in
mm in
kg lb
0115708
HC 100
-
3,1 10.0
355 14
475 18.75
52 115
0130376
HC 25
-
0,76 2.5
355 14
475 19
13 29
0115709
HC 50
-
1,5 5.0
355 14
475 18.75
26 58
0130384
HE 100
-
3.1 10.2
355 14
475 19
55 121
0115713
HE 25
-
0,76 2.5
355 14
475 18.75
16 36
0130383
HE 50
-
1.5 5
355 14
475 19
30 66
0009508
HP 50A
355 14
1,5 4.8
0008293
HPG 100
air-cooled, 4 cycle, single cylinder, gasoline engine Honda
6 8
3,1 10.0
355 14
475 18.75
92 204

Specifications may change due to continuous product development.
* Actual power output may vary due to conditions of specific use.